Company news

Vertical Cuttings Dryer used in Water-based Mud Field

Pub Date:Mar 30, 2018    |    Views:83    |    

Vertical Cuttings Dryer provides operators a important advantage in meeting more and more tight environmental rules for cuttings disposal. The flow of cuttings into the VERTI-G appliance is PLC-controlled and unceasingly fed to yield optimum liquid/ solid separation. Once cuttings area unit introduced into the dryer’s charge hopper, wide spaced, severally adjustable flights unceasingly direct cuttings to the shaker screen surface.


Vertical Cuttings Dryer

 
KOSUN G2 vertical cuttings dryer VC2000 serve successfully in water-based mud field and it is the first cuttings dryer successfully applied in water-based mud treatment so far in the world. VERTI-G Cuttings Dryers is very efficient and long lasting as these products are manufactured using high-grade stainless steel obtained from the top vendors. To meet the requirements of our valued clients, we are able to offer these products in various specifications.
 
The 
Vertical Cuttings Dryer makes its contribution with its innovative process after the shale shaker completes its task. Cuttings that pass over the shaker typically have an average of 30% to 50% ROC (Retention on Cuttings) when they enter the proprietary auger system and begin to cycle through the VERTI-G cuttings dryer. The initial processing is done with a vertical cutting dryer that utilizes centrifugal force to take advantage of their differing densities to separate the largest portion of the remaining drilling fluid from the cuttings. The processed cuttings are discharged from the vortex dryer into the adjacent shale bin, and then have an average ROC between 4% and 7% once processing is complete. This ROC percentage represents cuttings suitable for immediate disposal requiring minimal if any further stabilization. Processed waste material is lighter, less toxic and is a more cost-efficiency.


86 29 87304914 sales@adkosun.com Online Service