Integrating the structural features and design concepts of the mobile and skid-mounted solids control system for satisfying the drilling requirements on time reduction, moving speed improvement and cost trimming, KOSUN has developed Mobile Solids Control System giving priority to safety which is followed by efficiency and environmental protection and has greatly increased the system automation. Actual application also proves that it not only has the advantages of simple structure, security and compact design, but also has the unparalleled edges as ease of moving and large scale of application.>>Send an Enquiry sales@adkosun.com<<

KOSUN Mobile Solids Control System Pictures:

Mobile Solids Control System最先出现在Solids Control System, Slurry Treatment Plant, HDD mud recycling system-KOSUN。

The multifunctional design of KOSUN Skid-mounted Solids Control System enables the overall system to meet the requirements of various well depths and drilling fluids. Each solid control equipment can operate independently or collectively with the others. KOSUN is able to manufacture the mud circulating system for 350HP, 450HP, 550HP, 650HP, 750HP Workover Rig and for 1000HP, 1500HP and 2000HP Skid-mounted Land Rig.>>Send an Enquiry sales@adkosun.com<<

KOSUN Skid-mounted Solids Control System Working Sites:

Skid-mounted Solids Control System最先出现在Solids Control System, Slurry Treatment Plant, HDD mud recycling system-KOSUN。

KOSUN is able to customize its system to produce the arctic solids control system which is solely applied under extremely cold temperature to meet the requirements of the polar cold ( minus 40 degrees centigrade ) working conditions.>>Send an Enquiry sales@adkosun.com<<

KOSUN Arctic Solids Control System Working Site:

Arctic Solids Control System最先出现在Solids Control System, Slurry Treatment Plant, HDD mud recycling system-KOSUN。

KQG30 ATC Automatic Tank Cleaning System Description

KQG30 Automatic Tank Cleaning System is to automatically clean the tank bottom mud generated by solid control system, crude oil storage tank, etc. The working principle is to install the mechanical high pressure cleaning machine on the upper part of the tank to be cleaned, inject a certain amount of water into the water tank of the KQG30 Automatic Tank Cleaning System, and start the high pressure pump system of the Automatic Tank Cleaning System will automatically clean. It is mainly carried out through filtration, inclined plate settling, cyclone separation and other processes, and the cleaning water can be recycled. The system is equipped with material self-priming pump, cyclone inlet pump, high pressure pump, diaphragm pump, etc., and the processing capacity is 30m³/h.

KQG30 Automatic Tank-Cleaning System use site layout

KQG30 Automatic Tank-Cleaning System technical parameters

Dimensions: 9150mm×2250mm×2550mm (40 feet high container can be transported);

Capacity: 30m³/h;

Total system power: 24kw;

Scope of use: mud tank, oil tank cleaning can be used;

Total weight of Automatic Tank-Cleaning System : 10000kg;

KQG30 Automatic Tank Cleaning Equipment

Separator

Skid water tank

Dosing device

Cyclone device

Material self-priming pump, cyclone inlet pump, high pressure pump, diaphragm pump

The system includes an electrical control cabinet, explosion-proof class Exd II BT4

The advantages of KQG30 Automatic Tank-Cleaning System

●  the equipment can quickly extract and clean the waste oil, greatly shorten the operation time.

●  Automation equipment can replace manual entry into dangerous environments and reduce safety risks.

●  the recovered waste oil can be reused after treatment, reducing resource waste and reducing production costs.

●  cleaning water can be recycled, effectively reducing water consumption.

●  the operation is simple, can efficiently complete the cleaning task.

●  support the recycling of resources, in line with the concept of green production and sustainable development.

KQG30 Automatic Tank Cleaning最先出现在Solids Control System, Slurry Treatment Plant, HDD mud recycling system-KOSUN。

Based on their intended application, mud cooling systems are broadly categorized into two main types: onshore mud cooling equipment and offshore platform mud cooling equipment.

Onshore mud cooling equipment is further classified based on whether an adequate water supply is available at the installation site:

1. Recommended for Sites with an Adequate Water Supply

Cooling Method: Direct Cooling

Advantages: Simple structure; large-diameter inlet pipe minimizes the risk of clogging

Temperature Drop: 20–30°C (depends on ambient conditions)

Processing Capacity: 120 to 200 m³/h

Technical Parameters

2. Recommended Solution for Sites with Available Water Sources Where Water Conservation is Required:

Cooling Method: Plate Heat Exchanger + Closed-Circuit Cooling Tower Configuration.

3. Recommended Solution for Sites Lacking or Devoid of Water:

Cooling Method: Plate Heat Exchanger + Air Cooler Configuration.

Advantages: Ideal for water-scarce regions; one-time investment with zero operational costs; 20–30°C temperature drop (depends on ambient temperature); processing capacity 120–200 m³/h.

4. Recommended Solution for Sites Lacking a Water Source (or with Limited Water Availability) Where Cooling Below Ambient Temperature is Required:

Cooling Method: Plate Heat Exchanger + Air Cooler + Chiller Unit.

Advantages: Ideal for regions with limited or no access to water; one-time initial investment with virtually no recurring costs; includes a chiller unit to lower temperatures below ambient levels; maximizes operational cost savings while meeting site-specific requirements; achieves a temperature reduction of 20–30°C with a processing capacity of 150–200 m³/h.

5. Offshore Platform Mud Cooling:

Cooling Method: Titanium Plate Heat Exchanger (using seawater as the cooling source);

Advantages: Compact footprint, significant temperature reduction, operating temperature range of 30–50°C, processing capacity of 120–200 m³/h, and can be used individually or in combination depending on required processing volume.

Technical Specifications:

Mud Cooling System最先出现在Solids Control System, Slurry Treatment Plant, HDD mud recycling system-KOSUN。

Features of Solids Control System:
1. With modular design and small footprint, it can be flexibly configured and installed according to the customer’s requirements.
2. The side plates of mud tanks are designed with corrugated and load-supporting type, which are safer and can bear more load.
3. The system adopts a centralized electric control, being convenient for operation.
4. All equipment is designed with corrosion and wear resistance, with a long service life.
5. It is is adaptable to severe drilling operating conditions, being cold-resistant, heat-resistant, explosion-proof, leakage-proof, corrosion resistant and rainproof.
6. It is simple for installation and disassembly, and convenient for frequent moving along with drilling crew.

Operating Principle of Solids Control System:
Solids control system assembles five-stage solids control equipment, security equipment and other auxiliary equipment via manifolds according to their separation effects in an orderly way. Mud tank serves as a carrier and drilling fluid carrying cuttings directly enters shale shaker through a diverter. The shale shaker separates big cuttings particles from drilling fluid and the treated drilling fluid containing smaller particles passes through screens and enters the mud tank. If mud contains bubbles, self-priming device of vacuum degasser can suction the mud into the degasser for mud- gas separation. The degassed mud is then fed to desander and desilter via centrifugal pump. Solid- liquid separation of mud is continued in cyclones by using the principle of centrifugal sedimentation. Solid particles within 44~74 μm separated by desander and those within 15~44 μm separated by desilter are discharged and the mud enters the mud tank under centrifuge through manifolds connecting with cyclones for the last stage separation. Submersible slurry pump (screw pump) feeds mud to decanter centrifuge and solids particles over 2~15μm in diameter are separated by the centrifuge. Each mud tank is connected by using built-in pipes. During drilling operations, drilling fluids of different separation effects can be pumped for use as needed. Jet mud mixer on mud tank can prepare mud as needed.>>Send an Enquiry sales@adkosun.com<<

Tags: solids control, solids control equipment, solids control equipment for sale, solid control equipment drilling for sale, mud solids control, solids control system, solids control companies, solid control oil and gas, solid control in drilling, solid control equipment market, solids control services, solid control system drilling, solid control unit, drilling mud solids control, mud solids control equipment, drilling mud solids control system, solid control equipment drilling, rig solid control system, solid control equipment drilling offshore, solids control and waste management in drilling operations, solid control equipment used in drilling operation.

Drilling Mud Solids Control System最先出现在Solids Control System, Slurry Treatment Plant, HDD mud recycling system-KOSUN。