Industry Information-KOSUN Solids Control

Industry Information

Industry Information

Home > News > Industry Information >

Nov 14, 2024KOSUN_mechanical mud solid control system

Solid control system, also known as drilling fluid purification system, is mainly used for solid phase control and solid-liquid separation of drilling fluid in the drilling process, and achieve mud recycling under the condition of ensuring the stability of drilling fluid performance. The solid contro...

Nov 12, 2024Sludge water treatment system commonly used process two

Sludge water treatment system commonly used process two The third stage: secondary swirl After being treated by the primary cyclone, the slurry flows into the secondary cyclone main tank, and the slurry pump is pressurized into the secondary cyclone, and the 0.075mm-0.020mm particles in the mud are...

Oct 21, 2024Specific application of vacuum degasser in underbalanced drilling technology

In the drilling process, the gas carried by the drilling fluid from the well affects the performance of the mud and has safety risks, and also affects the service life of some solid control equipment, so it is necessary to install a vacuum degasser to remove the gas in the mud. In underbalanced drill...

Oct 14, 2024Waste oil-based drilling fluid treatment methods

First, the importance of waste oil-based drilling fluid treatment Waste oil-based drilling fluid is a drilling fluid used in drilling. The main components are oil and drilling sludge. Because it contains a large amount of waste oil, if it is directly discharged into the environment, it will seriousl...

Oct 11, 2024What is the difference between solid drilling control and mud retention?

Drilling solid control system is a slurry pulping system for drilling rig, which is mainly used to control and manage the mud performance in the drilling process, and provide the necessary lubrication and cooling conditions for drilling operations. Mud not landing is the back-end equipment of drilli...

Oct 08, 2024 Introduction to sludge treatment process

The selection of sludge treatment technology should be considered according to the characteristics of sludge, treatment objectives and economic conditions. With the improvement of environmental awareness and technological progress, sludge treatment will be more inclined to the direction of efficien...

Sep 29, 2024 How to deal with piling mud?

Piling mud is mainly composed of soil, water and chemical substances, which contains a lot of suspended matter and organic matter, if not treated directly discharged, will cause serious pollution to the environment. Piling mud is an inevitable waste in construction projects. How to deal with the mud ...

Sep 26, 2024 Dry and wet separation equipment for shield dregs

The so-called dry and wet separation equipment of shield dreg is a set of real-time treatment system of construction site dreg developed and applied according to local conditions in view of the limited construction site of the project, which can realize the classification, dehydration, separation and...

Sep 10, 2024What are the working principles of the solid-liquid separation equipment ?

Mixtures are generally divided into homogeneous mixtures and heterogeneous mixtures. There are more than two phase states in the interior of heterogeneous mixtures, in which solid particles and microdroplets are called dispersed phases or dispersions...

Sep 03, 2024 How to deal with geothermal well mud

Geothermal well mud refers to the mud used for drilling geothermal Wells. How to deal with geothermal well mud? The most prominent feature of geothermal well mud is resistance to high temperature, high temperature will lead to mud clay dispersion due to high temperature, thickening, and even solidifi...

Index

Pre

6

7

8

9

10

11

12

Next

End

09May

09May

08May

07May

06May

28Apr

27Apr

21Apr

21Apr

21Apr

21Apr

21Apr